那曲檬骨新材料有限公司

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
創作
電子發燒友網>電子資料下載>規則標準>USB 2.0 Transceiver Macrocell

USB 2.0 Transceiver Macrocell

2009-04-06 | rar | 333 | 次下載 | 10積分

資料介紹

High volume USB 2.0 devices will be designed using ASIC technology with embedded USB 2.0 support.For full-speed USB devices the operating frequency was low enough to allow data recovery to be handled in a vendors VHDL code, with the ASIC vendor providing only a simple level translator to meet the USB signaling requirements. Today's gate arrays operate comfortably between 30 and 60 MHz. With USB 2.0signaling running at hundreds of MHz, the existing design methodology must change.As operating frequencies go up it becomes more difficult to compile VHDL code without modification.This document defines the USB 2.0 Transceiver Macrocell Interface (UTMI) and many operational aspects of the USB 2.0 Transceiver Macrocell (UTM). The intent of the UTMI is to accelerate USB 2.0 peripheral development. This document defines an interface to which ASIC and peripheral vendors can develop.ASIC vendors and foundries will implement the UTM and add it to their device libraries. Peripheral and IP vendors will be able to develop their designs, insulated from the high-speed and analog circuitry issues associated with the USB 2.0 interface, thus minimizing the time and risk of their development cycles.The figure below summarizes a number of concepts expressed throughout this spec. There are assumed to be three major functional blocks in a USB 2.0 peripheral ASIC design: the USB 2.0 Transceiver Macrocell,the Serial Interface Engine (SIE), and the device specific logic.

USB 2.0 Transceiver Macrocell (UTM)
This block handles the low level USB protocol and signaling. This includes features such as; data serialization and deserialization, bit stuffing and clock recovery and synchronization. The primary focus of this block is to shift the clock domain of the data from the USB 2.0 rate to one that is compatible with the general logic in the ASIC.
Some key features of the USB 2.0 Transceiver are:
? Eliminates high speed USB 2.0 logic design for peripheral developers
? Standard Transceiver interface enables multiple IP sources for USB 2.0 SIE VHDL
? Supports 480 Mbit/s "High Speed" (HS)/ 12 Mbit/s “Full Speed” (FS), FS Only and "Low Speed" (LS)
Only 1.5 Mbit/s serial data transmission rates.
? Utilizes 8-bit parallel interface to transmit and receive USB 2.0 cable data
? SYNC/EOP generation and checking
? Allows integration of high speed components in to a single functional block as seen by the peripheral designer
? High Speed and Full Speed operation to support the development of "Dual Mode" devices
? Data and clock recovery from serial stream on the USB

下載該資料的人也在下載 下載該資料的人還在閱讀
更多 >

評論

查看更多

下載排行

本周

  1. 1電子電路原理第七版PDF電子教材免費下載
  2. 0.00 MB  |  1490次下載  |  免費
  3. 2單片機典型實例介紹
  4. 18.19 MB  |  93次下載  |  1 積分
  5. 3S7-200PLC編程實例詳細資料
  6. 1.17 MB  |  27次下載  |  1 積分
  7. 4筆記本電腦主板的元件識別和講解說明
  8. 4.28 MB  |  18次下載  |  4 積分
  9. 5開關電源原理及各功能電路詳解
  10. 0.38 MB  |  10次下載  |  免費
  11. 6基于AT89C2051/4051單片機編程器的實驗
  12. 0.11 MB  |  4次下載  |  免費
  13. 7基于單片機和 SG3525的程控開關電源設計
  14. 0.23 MB  |  3次下載  |  免費
  15. 8基于單片機的紅外風扇遙控
  16. 0.23 MB  |  3次下載  |  免費

本月

  1. 1OrCAD10.5下載OrCAD10.5中文版軟件
  2. 0.00 MB  |  234313次下載  |  免費
  3. 2PADS 9.0 2009最新版 -下載
  4. 0.00 MB  |  66304次下載  |  免費
  5. 3protel99下載protel99軟件下載(中文版)
  6. 0.00 MB  |  51209次下載  |  免費
  7. 4LabView 8.0 專業版下載 (3CD完整版)
  8. 0.00 MB  |  51043次下載  |  免費
  9. 5555集成電路應用800例(新編版)
  10. 0.00 MB  |  33562次下載  |  免費
  11. 6接口電路圖大全
  12. 未知  |  30320次下載  |  免費
  13. 7Multisim 10下載Multisim 10 中文版
  14. 0.00 MB  |  28588次下載  |  免費
  15. 8開關電源設計實例指南
  16. 未知  |  21539次下載  |  免費

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935053次下載  |  免費
  3. 2protel99se軟件下載(可英文版轉中文版)
  4. 78.1 MB  |  537791次下載  |  免費
  5. 3MATLAB 7.1 下載 (含軟件介紹)
  6. 未知  |  420026次下載  |  免費
  7. 4OrCAD10.5下載OrCAD10.5中文版軟件
  8. 0.00 MB  |  234313次下載  |  免費
  9. 5Altium DXP2002下載入口
  10. 未知  |  233046次下載  |  免費
  11. 6電路仿真軟件multisim 10.0免費下載
  12. 340992  |  191183次下載  |  免費
  13. 7十天學會AVR單片機與C語言視頻教程 下載
  14. 158M  |  183277次下載  |  免費
  15. 8proe5.0野火版下載(中文版免費下載)
  16. 未知  |  138039次下載  |  免費
顶尖百家乐官网对单| 明升国际网| 澳门百家乐官网赌技术| 玩百家乐去哪个娱乐城最安全 | 博狗娱乐城| 百家乐专用| 澳门百家乐官网真人版| 亚洲顶级赌场手机版| 百家乐视频游戏帐号| 真人百家乐官网开户优惠| 易发娱乐城| 大发888娱乐充值| 沙龙百家乐娱乐平台| 百家乐连开6把小| 百家乐官网不锈钢| 小孟百家乐官网的玩法技巧和规则| 赌百家乐官网大小点桌| 菲律宾百家乐官网游戏| 南平市| 天将娱乐城开户| 大发888充值100元| 大家旺百家乐的玩法技巧和规则| 网上百家乐官网试| 百家乐官网注册下注平台| 鸿博娱乐场| 美乐门娱乐| 赌场| 九江县| 百家乐官网网上公式| 中超| 百家乐官网拍是什么| 新利国际网站| 南通棋牌游戏中心| 大发888真钱娱乐城下载| 百家乐路单怎样| 南宁百家乐赌机| 亚洲百家乐博彩的玩法技巧和规则| 如何看百家乐的玩法技巧和规则| 百家乐六手变化混合赢家打| 百家乐塑料扑克牌盒| 广州百家乐桌子|